Trade Enviro is an Australian environmental compliance supplier providing weighted drain covers designed for regulated industrial and commercial environments. Weighted drain covers are temporary stormwater protection products used to seal exposed drain pits during spill incidents, helping prevent contaminants from entering the stormwater network while clean-up is carried out.
Constructed from PVC with a geotextile underlay and filled with weighted gel, these covers conform to pit edges without mechanical fixing, allowing rapid deployment as part of on-site spill response procedures.
Trusted by industrial operators across Australia
| Model | Description | Weight |
|---|---|---|
| TEDC2 | Weighted Drain Cover | 15kg |
Where Weighted Drain Covers Are Used
Weighted drain covers are used to temporarily seal exposed stormwater pits during spill incidents, allowing clean-up to occur before contaminants enter the stormwater system.
They are commonly deployed in:
- Workshops and service areas
- Industrial yards and loading zones
- Fuel and oil handling areas
- Sites with exposed stormwater pits
Where Weighted Drain Covers Are Not Suitable
Weighted drain covers are not intended for permanent stormwater control and should not be used:
- As a fixed or long-term containment solution
- In areas subject to vehicle traffic while deployed
- Where continuous runoff management is required
For these applications, alternative stormwater containment systems may be required.
Important – Temporary Use Only
Important: Weighted drain covers are designed for temporary spill response use only. They do not provide permanent stormwater treatment or long-term containment and should be used in accordance with site-specific spill response procedures.
