Portable spill containment
Portable Bunding for Spill Containment
Portable bunding creates a contained work or storage area where permanent bund walls are impractical. These collapsible spill bunds suit temporary worksites, fuel handling, chemical storage and mobile operations where the containment area needs to be deployed, relocated or packed down as site conditions change.
507 L–27,000 L capacities
Standard sizes plus custom configurations.
Fold-out leg supports
Fast setup without permanent fixings.
Standard or HD PVC
Selected for the liquid, site and intended use.
Typical 5–7 business days
Timing confirmed with your configuration and freight.
Configured for your site
Confirm the right portable bund before ordering
Send the liquid or SDS, required capacity, footprint, ground conditions and deployment needs. We’ll confirm a suitable size, material and access arrangement for the site.
Typical lead time: 5–7 business days before despatch for most custom orders. Timing is confirmed with your configuration and freight. Need it in a hurry? Call 0434 314 803.
Trusted by organisations across Australia
Practical containment
Why Choose Portable Bunding?
A portable bund provides containment where a fixed barrier would be disruptive, excessive or unsuitable for the site. The final system is selected around the liquid, capacity, available footprint and how often the bund must move.
Rapid deployment
Set up a defined containment area without concrete works.
Reusable across sites
Fold, transport and redeploy as the work area changes.
Configuration review
Material, capacity and access are confirmed before supply.
Available Configurations
Trade Enviro supplies a wide range of standard portable bund sizes, with custom configurations available to suit your site, storage volumes, and compliance requirements.
Model | Size (m) | Wall Height | Capacity | PVC Options |
|---|---|---|---|---|
| TEPSB13 | 1.3 × 1.3 | 300mm | 507 L | Standard / HD |
| TEPSB19 | 1.9 × 1.9 | 300mm | 1,083 L | Standard / HD |
| TEPSB24 | 2.4 × 2.4 | 300mm | 1,728 L | Standard / HD |
| TEPSB36 | 3.6 × 3.6 | 300mm | 3,888 L | Standard / HD |
| TEPSB15×6 | 15 × 6 | 300mm | 27,000 L | HD Only |
Portable Bunding vs Temporary Bunding
Portable bunding is used where larger-capacity spill containment is required without permanent installation. These collapsible bunds are commonly deployed for fuel handling, chemical storage, mobile operations, and temporary worksites where containment may need to be relocated or reused.
Temporary bunding is typically used for short-term spill response or small containment tasks where rapid deployment is the main priority rather than storage capacity or repeated site use.
Common use cases include:
- Temporary & Remote Worksites
Rapid containment for construction sites, shutdowns, field maintenance, and mobile operations. - Leased or Restricted Sites
Create compliant bunded areas where permanent bunding or concrete works aren’t permitted. - Hazardous Liquid & Drum Storage
Suitable for oil bunding, fuel bunding, and chemical storage where permanent bund walls are not practical. - Mobile Teams & Changing Layouts
Fold, transport, and redeploy bunds as sites or storage locations change. - Emergency Spill Response
Deploy quickly to contain leaks before they reach soil or stormwater. - Bottom line: If you need fast, flexible spill containment that meets Australian compliance standards — without the cost or commitment of permanent bunding – portable bunding is the right solution.
Portable Bunding vs Fixed Bunding Systems
| Feature | Portable Bunding | Fixed Bunding Systems |
|---|---|---|
| Installation | No permanent fixings required | Mechanically fixed or installed in place |
| Portability | High | Low |
| Storage When Not In Use | Folds compactly | Remains installed |
| Relocation | Easy to move and redeploy | Intended to stay in one location |
| Best Use | Temporary worksites, mobile operations, relocatable containment | Permanent containment zones and fixed site layouts |
Installation & Maintenance
- Arrives folded and installs in minutes using slide-in leg braces
- Optional eyelets allow pegging or securing on uneven ground
- Easy to clean with hose or wipe-down after use
- Collapsible/Folds flat for compact storage when not in use
Key Construction Features
- Heavy-duty PVC or chemical-resistant HD PVC options
- Fusion-welded seams for reliable, watertight containment
- Reinforced corners and fold-out leg supports for stability
- UV-stabilised for long-term outdoor use
- Folds compactly for transport and redeployment
Practical selection support
Why Trade Enviro?
Trade Enviro supplies and customises portable bunding solutions to meet Australian Standards (AS3780) and EPA guidelines. We work directly with you to assess site requirements and recommend the right containment system for your operation.
Trusted by clients across mining, civil construction, industrial operations, and local government, we deliver reliable spill containment solutions backed by local expertise, fast turnaround, and Australia-wide delivery.
FAQs
Can portable bunding be driven over?
Yes. Walls are collapsible to allow forklift or vehicle access when needed.
What’s the difference between standard and heavy-duty PVC?
Heavy-duty PVC is thicker and more resistant to fuel and harsh chemicals. Recommended for rugged use.
How quickly can I get a custom-sized bund?
Most custom orders are manufactured and dispatched within 5–7 business days.
Is it suitable for long-term outdoor use?
Yes – materials are UV-stabilised and weather-resistant for Australian conditions.
